If you are intending to leave your caravan sited and dont need the chassis or road lights checking then this is the service for you.

The service will ensure that all the fitted equipment in the caravan is working correctly and safely will ensure you enjoy a stress free break.  Checking the caravan for damp and other issues means that they can be fixed before they get out of control and too expensive.

Please note that if you do intend to tow the caravan again it is strongly advised that you have the chassis and running gear checked prior to setting off.  Things can get a little rusty or seized if they have not been used for a while.  A Caravan Chassis service is just the job to get things moving again.


The following checks are carried out during the habitation service:-

Full gas check

  • Ensure no gas leaks
  • Check copperation of all safety shut off valves / flame failure devices work correctly
  • Check condition of regulator and connecting hose

Any gas leaks will be addressed at time of service, this may involve disconection of the gas appliace.  A further appointment may be needed to remidy the fault.



  • Check the pump operates correctly
  • Check operation of any taps / showers controls
  • Ensure no water leaks noted within the caravan
  • Change water filter if requested



  • Ensure the toilet operates correctly and note any leaks or issues


Electical 240v

  • Check hook up cable, plug and socket condition
  • Ensure polarity is correct
  • Check operation of RCD and MCB's, record trip time of RCD
  • Test all 240v sockets inside and outside
  • Check all appliances work correctly on 240v
  • Check 240v lights work
  • Check battery charger is working
  • Check earth bonding to chassis


Electrical 12v

  • Check condition of leisure battery
  • Check condition of 12N, 12S, 13pin plugs and cables
  • Check operation of road lights and reflectors
  • Check operation of fridge powered from towed veichle
  • Check other caravan apliances, lights and 12v sockets


Fire & Safety

  • Check operation of fire alarm
  • Check operation of CO alarm
  • Check date of fire extinguisher
  • Check Microwave for any leakage



  • Check operation of window
  • Check operation of locker catches
  • Check all blinds and fly screens work
  • Check roof lights operate correctly
  • Check floor for any delamination
  • Full damp check



  • Check seals and trims
  • Check condition of body work
  • Check lockers and hatches
  • Check grab handles are secure
  • Check aerial fittings
  • Check any other external fittings

Please inform us if you have any pre-existing faults or conditions before booking so we can discuss the issue and try to resolve the fault at the time of the appointment.  This is to save any potential disapointment in having to make an additional booking.